Maytag MDB7601AWB Use and Care Guide - Page 7

Adjustable, Removing, the Upper Rack - dishwasher

Get Maytag MDB7601AWB - Jetclean II Dishwasher PDF manuals and user guides View all Maytag MDB7601AWB manuals
Add to My Manuals
Save this manual to your list of manuals

Page 7 highlights

Loading Adjustable Rack [select models) The Adjustable Upper Rack (select models) can be raised or lowered to accommodate taller plates, platters, pans, etc. optimizing useable space in both upper and lower racks. Full size dinner plates can be loaded in the upper rack if it is in the lower position. Always adjust the upper rack before loading. To lower the rack: 1. Pull the rack fully out. Adjusters 2. Place thumbs on each lever on the adjuster while holding rack with hands. 3. Press down on the levers with thumbs and push rack down. The rack will come to a stop when it is in position. To raise the rack: 1. Pull the rack fully out. 2. Place hands on both sides and lift up until rack comes to a stop and latches in place. Notes • The dishwasher will not operate correctly if the wash arm is not aligned with one of the water inlet holes on back wall of the dishwasher. • The left and right side adjusters on the racks must both be fully in the upward or downward position for proper connection. Removing the Upper Rack The rack can be removed when tall or oversized items need to be loaded into the lower rack. Unload the rack before removing it from the dishwasher. To remove rack with tab-lock rack stops: 1. Roll the rack '/3to ½ of the way out. 2. Locate the rack stops at the end of each track. Squeeze the tab in the middle of the rack stop and pull the rack stop straight out. Take care to support the rack while removing the rack stops. 3. Roll the rack all the way out of the track and remove from the dishwasher. Tab Lock Rack Stop To replace: 1. Replace the Style may vary by model dishwasher rack by guiding the wheels into the tracks. 2. Push each rack stop squarely into the end of the track until the catch pops into the small hole on the side of the track. 6

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
Loading
Adjustable
Rack
[select
models)
The Adjustable
Upper
Rack
(select
models)
can be
raised
or lowered
to accommodate
taller
plates,
platters,
pans, etc. optimizing
useable
space in both
upper
and lower
racks.
Full size dinner
plates
can be
loaded
in the upper
rack if it is in the lower
position.
Always
adjust
the upper
rack before
loading.
To lower
the
rack:
1. Pull the rack fully
out.
Adjusters
2. Place thumbs
on
each lever on
the adjuster
while
holding
rack with
hands.
3. Press down
on
the levers with
thumbs
and
push rack down.
The rack will
come to a stop when
it is in position.
To raise
the rack:
1. Pull the rack fully
out.
2. Place hands on both sides and lift up until
rack
comes
to a stop and latches
in place.
Notes
• The dishwasher
will
not
operate
correctly
if the
wash
arm
is not aligned
with
one
of the water
inlet
holes
on back
wall
of the dishwasher.
• The left and right
side
adjusters
on the racks
must
both be fully
in the upward
or downward
position
for
proper
connection.
Removing
the Upper Rack
The rack
can be removed
when tall
or oversized
items
need to be loaded
into the lower
rack.
Unload the
rack
before removing
it from the dishwasher.
To remove
rack with
tab-lock
rack stops:
1.
2.
Roll the rack '/3to ½of the way out.
Locate the rack stops at the end of each track.
Squeeze the tab in the middle
of the rack stop and
pull the rack stop straight
out. Take care to support
the rack while
removing
the rack stops.
3. Roll the rack all
the way out of the
track
and remove
from the
dishwasher.
To replace:
Style
may
vary by model
1. Replace the
dishwasher
rack by guiding
the
wheels
into the tracks.
Tab Lock
Rack Stop
2. Push each rack stop squarely
into the end of the
track
until the catch
pops into the small
hole on the
side of the track.
6