Maytag MDC4650AWB Use and Care Guide - Page 10

PortablDe ishwashers Connecting a Portable 1. Turn on the faucet at the sink until the water runs hot. Turn off the faucet. 2. Pull the connector from the recess in the back of the dishwasher. 3. Press down on the thumb release and lift the connector onto the faucet. 4. Remove pressure from the thumb release and tug slightly on the connector to be sure it is securely in place. 5. Turn the hot water on full force. 6. Check that the sink drain is open so water from the dishwasher can drain properly. 7. Pull the electrical cord from the recess. Plug it into a properly grounded outlet. 8. Select the proper cycle and options for the load and start the dishwasher. Care and Cleaning Clean the cabinet and laminate top with a soft damp cloth and liquid spray cleaner. To polish and protect the laminate top, use a product specifically developed for countertops such as Hope's Countertop Polish*. Apply an appliance wax to the cabinet once a year. Note: To protect the laminate top from damage, do not use it as a cutting surface or resting place for warm/hot cookware. Do not slide ceramic or other hard or abrasive objects across the surface. * Brand names are the trademarks of the respective manufacturer. Disconnecting a Portable 1. Be sure to turn the water supply off and press the pressure release button BEFORE removing the connector. 2. Press down on the thumb release and remove the connector from the faucet. 3. Push the connector and hoses back into the cabinet recess. 4. Unplug the electrical cord and push it back into the cabinet recess. Button 9