Maytag MEDB955F Door Reversal Guide - Page 2

6. Remove hinges from door C. Using a #2 Phillips screwdriver, remove the remaining 4 screws from the hinges. Then remove hinges A and B and set the screws and hinges aside. After removing the magnet latch, move it to the opposite side of the door by reversing the previous steps. 7. Transfer magnet latch D. Using a #2 Phillips screwdriver, remove the magnet latch and install it on the other side of the door. IMPORTANT: Because the magnetic force is strong, it is important to maintain a firm grip and to slide the magnet with a steady, gradual movement. Doing so can keep the magnet from reattaching to the metal surface and breaking, or from possibly pinching your fingers. Make sure arrow on front of shim points up. Rear of shim is embossed to ensure correct seating in opening. A. E. Remove housing. Holding it tightly, slide magnet over. B. Screw on shim. Holding magnet tightly, place edge of magnet on shim and lower magnet so edge rests flatly on shim. F. Holding it tightly, lift magnet off of shim. Remove shim. Holding magnet tightly, slide into place. Screw on housing. 2