Maytag MEDC300XW Owners Manual - Page 8

3. Select the desired cycle 5. Select End of Cycle Signal (if desired) Select the desired cycle for your load. See the Cycle Guide for more information about each cycle. SENSOR DRY/AUTOMATIC DRY Cycles You can select a different dryness level, depending on your load, by turning the knob to dryness level. Selecting Very or More Dry, Energy Preferred, or Less Dry automatically adjusts the dryness level of the fabrics at which the dryer will shut off. SENSOR DRY/AUTOMATIC DRY cycles give the best drying in the shortest time. Drying time varies based on fabric type, load size, and dryness setting. Choose Energy Preferred for optimal energy savings. Less Dry removes less moisture and is used for loads you may want to put on a hanger to complete drying. Very or More Dry removes more load moisture. Energy Preferred is used for a starting point for SENSOR DRY/AUTOMATIC DRY cycles. 4. Set temperature (on some models) Turn the END OF CYCLE SIGNAL knob to select the desired setting (On or Off). The End of Cycle Signal produces an audible sound when the drying cycle is finished. Promptly removing clothes at the end of the cycle reduces wrinkling. 6. Press PUSH TO START to begin cycle Push and hold the PUSH TO START knob to begin the cycle. DRYING RACK To purchase a drying rack for your dryer, please refer to "Assistance or Service" on the back cover of the manual or contact the dealer from whom you purchased your dryer. Part Number Accessory 3406839 Drying rack - fits 29" Super Capacity Plus Select temperature by turning the knob to the desired position or select the Automatic Dry Cycle that has the temperature included in the cycle selections. NOTE: Not all options and settings are available with all cycles. TEMPERATURE / Fabric Turn the TEMPERATURE / Fabric knob to change the drying temperature setting. See "Setting the Drying Temperature". 8