Maytag MEDP576KW Installation Instructions - Page 19

4. Remove screws from hinges 7. Flip door over Remove screws attaching hinges to door. 5. Remove screws from door Flip door over so handle side is down. 8. Attach door hinges Remove screws at top, bottom, and side of door (five screws). Keep door screws separate from hinge screws as they are different sizes. Holding door over towel on dryer, grasp sides of outer door and lift to separate it from inner door. NOTE: Do not pry apart with putty knife or screwdriver. Do not pull on door seal or plastic door catches. 6. Rotate outer door Rotate outer door 180º and set it back down on inner door. Be certain to keep cardboard spacer centered between doors. Reattach outer door panel to inner door panel so handle is on the side where hinges were just removed. Insert five door screws. Reattach door hinges to dryer door so that the larger hole is at the bottom of the hinge. 9. Remove and transfer plugs Remove the four screws that attach two plugs on the left side. Transfer plugs to opposite side using the same four screws. 19