Maytag MEDP576KW Installation Instructions - Page 6

Minimum spacing for recessed area or closet installation The dimensions shown following are for the minimum spacing allowed. ■■ Additional spacing should be considered for ease of installation and servicing. ■■ Additional clearances might be required for wall, door, and floor moldings. ■■ Additional spacing of 1" (25 mm) on all sides of the dryer is recommended to reduce noise transfer. ■■ For closet installation, with a door, minimum ventilation openings in the top and bottom of the door are required. Louvered doors with equivalent ventilation openings are acceptable. ■■ Companion appliance spacing should also be considered. Minimum Required Spacing Recessed Area Installation 14" max (356 mm) Mobile home - Additional installation requirements This dryer is suitable for mobile home installations. The installation must conform to the Manufactured Home Construction and Safety Standard, Title 24 CFR, Part 3280 (formerly the Federal Standard for Mobile Home Construction and Safety, Title 24, HUD Part 280). ■■ Metal exhaust system hardware, which is available for purchase from your dealer. ■■ Special provisions must be made in mobile homes to introduce outside air into the dryer. The opening (such as a nearby window) should be at least twice as large as the dryer exhaust opening. 15" (381 mm) 0" (0 mm) 0" (0 mm) 0" (0 mm) 14" max (356 mm) Closet Installation 15" (381 mm) 3" (76 mm) 48 in2 (310 cm2) 24 in2 (155 cm2) 3" (76 mm) 0" (0 mm) 0" (0 mm) 1" (25 mm) Additional spacing recommended 6