Maytag MEDX6STBW Installation Guide - Page 19
Lift door off top screws, Remove screws from hinges, Remove screws from door, Switch door catch,
![]() |
View all Maytag MEDX6STBW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
3. Lift door off top screws 6. Switch door catch, bezel, & plug Catch and bezel Plug Lift door until top screws in dryer cabinet are in large part of hinge slot. Pull door forward off screws. Set door (handle side up) on top of dryer. Remove top screws from dryer cabinet. 4. Remove screws from hinges Remove the door catch, bezel, and plug from the inside of the inner door by squeezing and pulling/pushing them. Place the door catch, bezel, and plug on the sides opposite from where they were. 7. Rotate outer door Remove screws attaching hinges to door. 5. Remove screws from door Rotate outer door 180º and set it back down on inner door. Reattach outer door panel to inner door panel so handle is on the side where hinges were just removed. Insert 4 door screws. 8. Flip door over Remove screws at top, bottom, and side of door (4 screws) that hold the inner and outer door together. Holding door over towel on dryer, grasp sides of outer door and lift to separate it from inner door. Set outer door aside. NOTE: Do not pry apart with putty knife or screwdriver. Do not pull on door seal or plastic door catches. Flip door over so handle side is down. 19
![](/manual_guide/products/maytag-medx6stbw-installation-guide-4ed50aa/19.png)