Maytag MEDX6STBW Use & Care Guide - Page 6

CYCLE GUIDE - SENSOR DRY CYCLES SENSOR DRY - Senses moisture in the load or air temperature and shuts off when the load reaches the selected dryness level. Choose ENERGY PREFERRED cycle for optimal energy savings. Not all cycles and settings are available on all models. Items to dry: Dryness Level: Temperature: Available Options: Cycle Details: Jeans, heavy work clothes, towels Work clothes, medium weight fabrics, sheets More Dry Energy Preferred Less Dry More Dry Energy Preferred Less Dry High Medium or Low Signal Wrinkle Prevent or Control Signal Wrinkle Prevent or Control Automatic cycles give the best drying in the shortest time. Drying time varies based on fabric type, load size, and dryness setting. Select a drying temperature based on the fabrics in your load. If you are unsure of the temperature to select for a load, select the lower setting rather than the higher setting. Casual, shirts, pants, lightweight items, synthetics, delicates, athletic wear More Dry Energy Preferred Less Dry Low Signal Wrinkle Prevent or Control NOTE: If loads do not seem as dry as you would like, select More Dry next time you dry a similar load. If loads seem drier than you like, select Less Dry next time you dry a similar load. CYCLE GUIDE - TIMED DRY CYCLES TIMED DRY - Will run the dryer for the specified time on the control. Not all cycles and settings are available on all models. Items to dry: Towels, bedding, children's clothing Cycle: Sanitize Temperature: Sanitize Available Options: Signal Any load Freshen Up Any Signal Rubber, plastic, heat sensitive fabrics Timed Dry Air Only Signal Cycle Details: Extended high-heat drying cycle intended to help sanitize items such as bedding, towels, and baby wear. This cycle is not recommended for all fabrics. For best results, run cycle to completion, do not interrupt. Use low to medium temperature to smooth out wrinkles, such as those found in clothes packed in a suitcase or in items wrinkled from being left in the dryer too long. No heat drying. CYCLE GUIDE - STEAM REFRESH CYCLE Not all cycles and settings are available on all models. Steam cycles are designed for use with dry loads to loosen wrinkles, reduce odors, and refresh fabrics. Items to dry: Any load Cycle: Steam Refresh Temperature: High Available Options: Signal Cycle Details: This cycle is best for reducing wrinkles and odors from 2 or more dry items. Cycle time will increase depending on number of items. Setting the Drying Temperature If your dryer has multiple heat settings: A High or Santize temperature setting may be used for drying heavyweight items such as towels and work clothes. A Low to Medium temperature setting may be used for drying medium-weight items such as sheets, blouses, dresses, underwear, permanent press fabrics, and some knits. Use the Air Fluff or Air Only (no heat) setting for foam, rubber, plastic, or heat-sensitive fabrics. Line dry bonded or laminated fabrics. NOTE: If you have questions about drying temperatures for various loads, refer to the care label directions. 6