Maytag MEDX6STBW Use & Care Guide - Page 8

Press PUSH TO START to begin cycle - manual

Page 8 highlights

3. Select the desired cycle Steam models 5. Select Signal (if desired) Non-steam models Turn the SIGNAL knob to select the desired setting (Off, Low, or High). The Signal produces an audible sound when the drying cycle is finished. Promptly removing clothes at the end of the cycle reduces wrinkling. 6. Select Wrinkle Prevent or Wrinkle Control (if desired) Select the desired cycle for your load. See the Cycle Guide for more information about each cycle. SENSOR DRY Cycles You can select a different dryness level, depending on your load, by turning the knob to dryness level. Selecting More Dry, Energy Preferred, or Less Dry automatically adjusts the dryness level of the fabrics at which the dryer will shut off. SENSOR DRY cycles give the best drying in the shortest time. Drying time varies based on fabric type, load size, and dryness setting. Choose Energy Preferred for optimal energy savings. Less Dry removes less moisture and is used for loads you may want to put on a hanger to complete drying. More Dry removes more load moisture. Energy Preferred is used for a starting point for SENSOR DRY cycles. Steam Refresh Reduces odors and wrinkles from small to medium-sized loads of dry items. Dry time will automatically adjust when the load size is sensed. Medium or High Temp Levels may be selected. 4. Set Temperature Select Wrinkle Prevent or Control by turning the knob to the desired position. Get up to 120 minutes of no-heat, periodic tumbling at the end of a cycle. Turn the WRINKLE PREVENT or CONTROL knob to OFF, ON, 60 min., or 120 min. at any time before the cycle has ended. NOTE: Not all options and settings are available with all cycles. 7. Press PUSH TO START to begin cycle Select temperature by turning the knob to the desired position or select the Sensor Dry cycle that has the temperature included in the cycle selections. Turn the TEMPERATURE knob to change the drying temperature setting. See "Setting the Drying Temperature". NOTE: Not all options and settings are available with all cycles. 8 Push and hold the PUSH to START knob to begin the cycle. DRYING RACK To purchase a drying rack for your dryer, please refer to "Assistance or Service" on the back cover of the manual or contact the dealer from whom you purchased your dryer. Part Number Accessory 3406839 Drying rack - fits 29" Super Capacity Plus

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28

8
Push and hold the PUSH to START knob to begin the cycle.
Select temperature by turning the knob to the desired position or
select the Sensor Dry cycle that has the temperature included in
the cycle selections. Turn the TEMPERATURE knob to change the
drying temperature setting. See “Setting the Drying Temperature”.
NOTE:
Not all options and settings are available with all cycles.
Turn the SIGNAL knob to select the desired setting (Off, Low, or
High). The Signal produces an audible sound when the drying
cycle is finished. Promptly removing clothes at the end of the
cycle reduces wrinkling.
DRYING RACK
To purchase a drying rack for your dryer, please refer to
“Assistance or Service” on the back cover of the manual or
contact the dealer from whom you purchased your dryer.
Part Number
Accessory
3406839
Drying rack - fits 29" Super Capacity Plus
Select Wrinkle Prevent or Control by turning the knob to the
desired position.
Get up to 120 minutes of no-heat, periodic tumbling at the end
of a cycle. Turn the WRINKLE PREVENT or CONTROL knob to
OFF, ON, 60 min., or 120 min. at any time before the cycle has
ended.
NOTE:
Not all options and settings are available with all cycles.
4.
Set Temperature
5.
Select Signal (if desired)
6.
Select Wrinkle Prevent or Wrinkle
Control (if desired)
7.
Press PUSH TO START to begin cycle
Select the desired cycle for your load. See the Cycle Guide
for more information about each cycle.
SENSOR DRY Cycles
You can select a different dryness level, depending on your load,
by turning the knob to dryness level.
Selecting More Dry, Energy Preferred, or Less Dry automatically
adjusts the dryness level of the fabrics at which the dryer will
shut off.
SENSOR DRY cycles give the best drying in the shortest time.
Drying time varies based on fabric type, load size, and dryness
setting. Choose Energy Preferred for optimal energy savings.
Less Dry removes less moisture and is used for loads you may
want to put on a hanger to complete drying.
More Dry removes more load moisture. Energy Preferred is used
for a starting point for SENSOR DRY cycles.
Steam Refresh
Reduces odors and wrinkles from small to medium-sized loads of
dry items. Dry time will automatically adjust when the load size is
sensed. Medium or High Temp Levels may be selected.
Steam models
Non-steam models
3.
Select the desired cycle