Maytag MEDZ600TE Use and Care Manual - Page 5

QUICK START GUIDE NOTE: This Use and Care Guide covers several different models. Your dryer may not have all of the cycles and features described. WARNING: To reduce the risk of fire, electric shock, or injury to persons, read the IMPORTANT SAFETY INSTRUCTIONS before operating this appliance. The following is a guide to using your dryer. Please refer to specific sections of this manual for more detailed information. START 1. Clean lint screen before each load. 2. Place laundry in dryer and shut door. 3. Press POWER. 4. Select SENSOR DRY or TIMED DRY Cycle. 5. Select WRINKLE PREVENT, if desired. See "Additional Features." 6. Select CYCLE SIGNAL to turn off, if desired. See "Additional Features." 7. Press and Hold START to start. SENSOR DRY CYCLES Sensor Dry Cycles automatically match the cycle setting to the type of load, and adjust drying time for optimal performance. See the "Cycles Sensor Dry Preset Settings Chart." To make changes during a Sensor Dry Cycle: 1. Press PAUSE/CANCEL once. 2. Select DRYNESS LEVEL and/or OPTION. NOTE: Dryness Level selections can be made only while using Sensor Dry Cycles. Selecting More, Normal, or Less automatically adjusts the sensed time needed. 3. Press and Hold START. TIMED DRY CYCLES Use a Timed Dry cycle to set a drying time and temperature. 1. Press POWER. 2. Rotate the dial to select a Timed Dry Cycle. 3. Press the TIME ADJUST up or down until the desired drying time is displayed. 4. Press TEMPERATURE until the desired temperature illuminates. 5. Press and Hold START. To make changes during a Timed Dry Cycle: 1. Press PAUSE/CANCEL once. 2. Adjust the Time and/or Options. 3. Press and Hold START. TIMED DRY - Use this cycle if items are still damp after a Sensor Dry cycle. RAPID DRY - Use for items requiring a short drying time. FRESHEN UP - Use this cycle to help smooth out wrinkles from clean, dry clothes. STOPPING OR RESTARTING To pause/stop the dryer at any time - Open the door or press PAUSE/CANCEL once. To restart the dryer - Close the door. Press and Hold START button until dryer starts. To end/cancel the dryer at anytime - Press PAUSE/CANCEL twice or open the door. 5