Maytag MFI2570FEB Owners Manual - Page 7

Remove Drawer Front, Replace Drawer Front

Get Maytag MFI2570FEB PDF manuals and user guides View all Maytag MFI2570FEB manuals
Add to My Manuals
Save this manual to your list of manuals

Page 7 highlights

5. Reconnect the water line by pulling back the locking collar ring while firmly pushing the water line into the connector. 6. Check for leaks. Replace the top hinge covers. Remove and Replace Freezer Drawer IMPORTANT: Two people may be required to remove and replace the freezer drawer. Graphics are included later in this section. Remove Drawer Front 1. Open the freezer drawer to full extension. 2. Loosen the four screws attaching the drawer glides to the drawer front. See Drawer Front Removal graphic. NOTE: Loosen screws three to four turns. Keep the screws in the drawer front. 3. Lift the drawer front up and off the top screws. See Drawer Front Removal graphic. Replace Drawer Front 1. Slide the drawer glides out of the freezer compartment. Insert the screws in the top of the drawer front into the slots in the drawer brackets. See Drawer Front Replacement graphic. 2. Pull the drawer brackets toward you to position the two screws in the bottom of the drawer front into the brackets. See Drawer Front Replacement graphic. 3. Completely tighten the four screws. Final Steps 1. Replace the base grille. WARNING Electrical Shock Hazard Plug into a grounded 3 prong outlet. Do not remove ground prong. Do not use an adapter. Do not use an extension cord. Failure to follow these instructions can result in death, fire, or electrical shock. 2. Plug into a grounded 3 prong outlet. 3. Return all removable parts to doors and drawer and food to refrigerator and freezer. 7

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
7
5.
Reconnect the water line by pulling back the locking collar
ring while firmly pushing the water line into the connector.
6.
Check for leaks. Replace the top hinge covers.
Remove and Replace Freezer Drawer
IMPORTANT:
Two people may be required to remove and replace
the freezer drawer. Graphics are included later in this section.
Remove Drawer Front
1.
Open the freezer drawer to full extension.
2.
Loosen the four screws attaching the drawer glides to the
drawer front. See Drawer Front Removal graphic.
NOTE:
Loosen screws three to four turns. Keep the screws in
the drawer front.
3.
Lift the drawer front up and off the top screws. See Drawer
Front Removal graphic.
Replace Drawer Front
1.
Slide the drawer glides out of the freezer compartment. Insert
the screws in the top of the drawer front into the slots in the
drawer brackets. See Drawer Front Replacement graphic.
2.
Pull the drawer brackets toward you to position the two
screws in the bottom of the drawer front into the brackets.
See Drawer Front Replacement graphic.
3.
Completely tighten the four screws.
Final Steps
1.
Replace the base grille.
2.
Plug into a grounded 3 prong outlet.
3.
Return all removable parts to doors and drawer and food to
refrigerator and freezer.
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
WARNING