Maytag MFW2055FRZ Use & Care Guide - Page 12

Air Filter Status Indicator The control panel displays the Air Filter status. ■ GOOD - The air filter icon on the control lights up in BLUE. ■ ORDER a replacement - The air filter icon on the control lights up in YELLOW. ■ REPLACE air filter - The air filter icon on the control lights up in RED and "Replace Filter" will appear. ■ EXPIRED - The air filter icon lights up in RED and "Replace Filter" flashes on the control display. After replacing the air filter, press and hold the AIR FILTER button for 3 seconds. The filter icons will turn off. See "Using the Control(s)." When the system is reset, the air filter icon will return to its BLUE color and the words "Replace Filter" will disappear from the display. NOTE: At any filter status, pressing and holding the AIR FILTER button for 3 seconds will reset the air filter status to Good and the air filter icon will turn off. Replacing the Air Filter The disposable air filter should be replaced every 6 months, or when the status indicator air filter icon turns on and starts flashing when the refrigerator door is opened. To order a replacement air filter, contact us. See "Accessories." 1. Remove the used air filter by squeezing in on the side tabs. 2. Install the new air filter and reset the status indicator using the instructions in the previous section. Install Produce Preserver (on some models) The accessory packet includes two produce preserver pouches, which should be installed in a crisper drawer prior to use. NOTE: For best performance, always use two pouches. The produce preserver absorbs ethylene, to slow the ripening process of many produce items. As a result, certain produce items will stay fresh longer. Ethylene production and sensitivity varies depending on the type of fruit or vegetable. To preserve freshness, it is best to separate produce with sensitivity to ethylene from fruits that produce moderate to high amounts of ethylene. Produces Ethylene Very Low High Low Very High Sensitivity to Ethylene High Broccoli Lettuce Spinach Apples Pears Med. Asparagus Citrus fruit Cantaloupe Low Carrots Berries Grapes Installing the Produce Preserver CAUTION: IRRITANT MAY IRRITATE EYES AND SKIN. DANGEROUS FUMES FORM WHEN MIXED WITH OTHER PRODUCTS. Do not mix with cleaning products containing ammonia, bleach or acids. Do not get in eyes, on skin or clothing. Do not breathe dust. Keep out of reach of children. FIRST AID TREATMENT: Contains potassium permanganate. If swallowed, call a Poison Control Center or doctor immediately. Do not induce vomiting. If in eyes, rinse with water for 15 minutes. If on skin, rinse with water. The produce preserver pouches should be installed in the housing, located on the wall of one of the crisper drawers. 1. Remove the FreshFlow™ Produce Preserver pouches from the packaging. 2. Lift up on the housing to remove it from the mounting tab. 3. Open the housing by pulling up and out on the back of the top of the housing. 4. Place both pouches inside the housing, then snap the housing back together. 5. Place the housing back on the mounting tab. Installing the Status Indicator The produce preserver comes with a status indicator, which should be activated and installed at the same time the pouches are installed. REPLACE MONTHS 1. Place the indicator face-down on a firm, flat surface. 2. Apply pressure to the bubble on the back of the indicator until the bubble pops, to activate the indicator. CAUTION IRRITANT Read cautions on back. ATTENTION IRRITANT prudences sur Lisez des l e revers. 12