Maytag MFW9700S Use and Care Guide - Page 4

INSTALLATION REQUIREMENTS Tools and Parts Gather the required tools and parts before starting installation. The parts supplied are in the washer drum. Tools needed for connecting the water inlet hoses s Pliers (that open to 1 39.5 mm]) s Flashlight (optional) Tools needed for installation s Open end wrenches 17 mm and 13 mm s Level s Wood block s Ruler or measuring tape Parts supplied: A B C D E A. Drain hose form D. Transport bolt hole plug (4) B. Inlet hose (2) E. Beaded strap C. Inlet hose washer (4) Alternate Parts Your installation may require additional parts. If you are interested in purchasing one of the items listed here, call the toll-free number on the cover or in the "Assistance or Service" section. If You Have You Will Need to Buy Laundry tub or standpipe taller than 96" (2.4 m) Sump pump system (if not already available) Overhead sewer Standard 20 gal. (76 L), 30" (76.2 cm) tall drain tub or utility sink and sump pump (available from local plumbing suppliers) Floor drain Siphon break, Part Number 285834; additional drain hose Part Number 8318155; and connector kit, Part Number 285835 Drain hose too short 4 ft (1.2 m) drain hose extension kit, Part Number 285863 Water faucets beyond reach of fill hoses 2 longer water fill hoses: 6 ft (1.8 m) Part Number 76314, 10 ft (3.0 m) Part Number 350008 Options Pedestal A pedestal will add to the total height of the washer for a total height of 53.5" (135.9 cm). Optional pedestal To order, call the dealer from whom you purchased your washer or refer to the "Assistance or Service" section of this manual. Pedestal Height Color Part Number 15.5" (39.4 cm) White WHP1500SQ 15.5" (39.4 cm) Black WHP1500SB Stack Kit Are you planning to stack your Maytag washer and dryer? To do so you will need to purchase a Stack Kit. To order, call the dealer from whom you purchased your dryer or refer to the "Assistance or Service" section of this manual. Ask for Part Number 8541503. 4