Maytag MGD6000AG Installation Guide - Page 20
Reinstall hinge and latch on, opposite sides, Reinstall inner door assembly, Reinstall door on dryer
View all Maytag MGD6000AG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
5. R einstall hinge and latch on opposite sides 7. Reinstall door on dryer Using a TORX® T25 screwdriver, reinstall the latch plate and latch backing plate with the 3 TORX screws removed earlier and the hinge assembly with the 5 screws on the opposite sides from which they were removed. 6. Reinstall inner door assembly Bottom of door Using a TORX T25 screwdriver, remove the 4 screws on the dryer. Insert the tabs on the hinge into the mounting slot and slide down to engage the top tab. Secure in place with the 4 TORX T25 screws removed earlier. Reverse door swing square-shaped door 1. Remove door from dryer Position the door with the inside of the door facing up. Reinstall the 10 screws securing the inner door to the outer door. Using a TORX T25 screwdriver, remove the 4 screws securing the door hinge to the dryer and lift up and out to remove the door. Place the door on a soft towel or other non-scratch surface. Retain or set aside the 4 screws. 20