Maytag MGR6600F Owners Manual - Page 14
Troubleshooting
View all Maytag MGR6600F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
TROUBLESHOOTING First try the solutions suggested here. If you need further assistance or more recommendations that may help you avoid a service call, refer to the warranty page in this manual, or visit http://www.maytag.com/product_help. In Canada, visit http://www.maytag.ca. Contact us by mail with any questions or concerns at the address below: In the U.S.A.: In Canada: Maytag Brand Home Appliances Customer eXperience Center 553 Benson Road Benton Harbor, MI 49022-2692 Maytag Brand Home Appliances Customer eXperience Centre 200 - 6750 Century Ave. Mississauga, Ontario L5N 0B7 Please include a daytime phone number in your correspondence. WARNING Electrical Shock Hazard Plug into a grounded 3 prong outlet. Do not remove ground prong. Do not use an adapter. Do not use an extension cord. Failure to follow these instructions can result in death, fire, or electrical shock. Problem Possible Causes and/or Solutions Nothing will operate Power supply cord is unplugged: Plug into a grounded 3 prong outlet. Household fuse is blown or a circuit breaker is tripped: Replace the fuse or reset the circuit breaker. If the problem continues, call an electrician. Main or regulator gas shut-off valve is in the Off position: See the Installation Instructions. The range is improperly connected to the gas supply: Contact a trained repair specialist, or see Installation Instructions. Surface burners will not operate Surface burner flames are uneven, yellow, and/or noisy The control knob is not set correctly: Push in knob before turning to a setting. Air in the gas lines: If this is the first time the surface burners have been used, turn on any one of the surface burner knobs to release air from the gas lines. Clogged burner ports: See the "Sealed Surface Burners" section. Clogged burner ports: See the "Sealed Surface Burners" section. Burner caps positioned improperly: See the "Sealed Surface Burners" section. Range converted improperly: If propane gas is being used, contact a service technician or see the "Warranty" section for contact information. Excessive heat around cookware on cooktop Cooktop cooking results not what expected Oven will not operate Oven burner flames are yellow or noisy Cookware is not the proper size: The cookware should be centered above the burner with the bottom sitting level on the grate. The flame should be adjusted so that it does not extend up the sides of the pan. Improper cookware: Ideal cookware should have a flat bottom, straight sides, and a well-fitting lid, and the material should be of a medium-to-heavy thickness. Control knob set to incorrect heat level: See the "Cooktop Use" section. Range is not level: Level the range. See the Installation Instructions. Air in the gas lines: If this is the first time the oven has been used, turn on any one of the surface burner knobs to release air from the gas lines. Control is locked: Press and hold CONTROL LOCK for 3 seconds to unlock. Control is in Demo mode: See the "Electronic Oven Controls" section. Demo mode is used for display models in a showroom. Electronic oven control set incorrectly: See the "Electronic Oven Controls" section. Range converted improperly: If propane gas is being used, contact a service technician or see the "Warranty" section for contact information. 14