Maytag MHWC7500YW Use & Care Guide - Page 14

INSTALLATION INSTRUCTIONS INSTALLATION REQUIREMENTS Tools and Parts Gather required tools and parts before starting installation. Tools needed: Adjustable or open end wrenches 15/32" (12 mm) and 1/2" (13 mm) Level 4" min (102 mm) Optional tools: Flashlight Bucket Options: Pedestal: You have the option of purchasing a pedestal for this washer. You may select an 11.8" (300 mm) pedestal. The pedestal will add to the total height of the washer. Wood block Ruler or measuring tape Pliers that open to 19⁄16" (39.5 mm) Parts supplied: NOTE: All parts supplied for installation are in the washer basket. Cable tie Inlet hoses (2) with washers U-shaped hose form Transport bolt hole plugs (4) 14 Pedestal Height 11.8" (300 mm) Approximate Height with Washer 44.7" (1135 mm) Color White Model Number LAB0050PQ Alternate parts: (Not supplied with washer) Your installation may require additional parts. To order, please refer to toll-free numbers on the back page of this manual. If you have: You will need: Laundry tub or standpipe Sump pump system (if not already taller than 55" (1.4 m) available) Overhead sewer Standard 20 gal. (76 L) 30" (762 mm) tall drain tub or utility sink, sump pump and connectors (available from local plumbing suppliers) Floor drain system Siphon Break Kit Part Number 285834 Connector Kit (x2) Part Number 285835 Additional Drain Hose Part Number 8318155 Drain hose too short Extension Drain Hose Part Number 285863 Connector Kit Part Number 285835 Water faucets beyond reach of fill hoses 2 longer water fill hoses: 6 ft (1.8 m) Part Number 76314 10 ft (3.0 m) Part Number 350008 Stack Kit: Are you planning to stack your washer and dryer? To do so you will need to purchase a Stack Kit. To order, call the dealer from whom you purchased your washer or refer to the "Assistance or Service" section. Ask for Part Number W10178021.