Maytag MIM1554WRS User Instructions - Page 12

Ice maker runs but produces very little ice • Is the room temperature hotter than normal? Room temperatures of more than 90°F (32°C) will normally reduce ice production. Electrical Shock Hazard Disconnect power before servicing. Replace all parts and panels before operating. Failure to do so can result in death or electrical shock. • Is the condenser dirty? Dirt or lint may be blocking the airflow through the condenser. See "Condenser" in the "Cleaning" section. • Is there scale buildup in the ice maker? If there is white scale buildup in the ice maker's water or freezing system, you should clean the ice maker. See "Interior Components" in the "Cleaning" section. • Is the drain cap securely in place? If the drain cap is loose, water will empty from the water pan, and you will have either thin ice or no ice. Tighten the drain cap if it is loose. Grid is not cutting ice sheets Is the cutter grid securely in place? Check the cutter grid harness plug to make sure the connection is intact. See "Interior Components" section of "Cleaning" for instructions on cutter grid removal. Off taste, odor or gray color in the ice • Is there unusually high mineral content in the water supply? The water may need to be filtered or treated. • Is there mineral scale buildup? Clean your ice maker. See "Ice Maker System" in the "Cleaning" section. • Are there food items stored in the ice bin? Do not store any foods in the ice bin. Were all the packaging materials removed? Make sure that all packaging materials were removed at the time of installation. Thin, soft or clumps of ice • Is there unusually high mineral content in the water supply? The water may need to be filtered or treated. • Is there mineral scale buildup? Clean your ice maker. See "Ice Maker System" in the "Cleaning" section. • Are there clumps of ice in the bin? If ice is not used regularly it will melt and form clumps. Break the clumps with the ice scoop provided. Excessive Weight Hazard I m Use two or more people to move and install ice maker. | Failure to do so can result in back or other injury. • Is the drain hose aligned over the drain? Move the ice maker to align the drain. See "Connect Water Supply." NOTE: Service technicians cannot repair plumbing problems outside of the ice maker. Call a licensed, qualified plumber. 12