Maytag MTB1954MEB User Guide - Page 4

INSTALLATION, CONT. Top-Mount Handle REFRIGERATOR DOOR HANDLE WITHOUT EXTENSION TRIM ALIGN HANDLE OVER SCREW AB HOLES. FIRST INSTALL THE "A" SCREW TO SECURE HANDLE, FOLLOWED BY THE "B" SCREW. DO NOT OVER TIGHTEN. NO. 2 PHILLIPS SCREW DRIVER IS REQUIRED FOR INSTALLATION. SNAP EXTENSION INTO PLACE AT THE BOTTOM OF THE HANDLE. INSTALL SCREW IN HANDLE HOLE. DO NOT OVER TIGHTEN. Door Adjustment (IF NEEDED) Door should be level when the cabinet is level. • The freezer door is too high. TOP MOUNT HANDLE INSTALLATION INSTRUCTIONS TOP OF FREEZER DOOR AB ALIGN HANDLE OVER SCREW HOLES. FIRST INSTALL THE "A" SCREWS TO SECURE HANDLE, FOLLOWED BY THE "B" SCREWS. DO NOT OVER TIGHTEN. NOTE: ALL HANDLE TIE DOWN SCREW HOLES AT THE TOP AND BOTTOM OF THE DOORS ARE SIZED FOR SELF THREADING SCREWS. DO NOT DRILL THEM TO A LARGER SIZE. AB NO. 2 PHILLIPS SCREW DRIVER IS REQUIRED FOR INSTALLATION. • Both doors are too high. REFRIGERATOR DOOR HANDLE WITH EXTENSION TRIM NO. 2 PHILLIPS SCREW DRIVER IS A B REQUIRED FOR INSTALLATION. SNAP TOP OF EXTENSION INTO PLACE AT THE BOTTOM OF THE HANDLE. ALIGN HANDLE OVER SCREW HOLES. FIRST INSTALL THE "A" SCREW TO SECURE HANDLE, FOLLOWED BY THE "B" SCREW. DO NOT OVER TIGHTEN. • Both doors are too low. ON CERTAIN MODELS REMOVE BACKING FROM TAPE. AFTER STEP 5 APPLY PRESSURE. 3 INSTALL SCREW IN HANDLE HOLE. DO NOT OVER TIGHTEN. SLIDE HANDLE EXTENSION OVER BRACKET AT BOTTOM OF DOOR. • Retighten screws after making adjustments. * Refer to installation instructions for more information.