Maytag MVWC700VJ Installation Instructions - Page 7

Complete the installation 1. Align sides of pedestal 3. Stand the washer/dryer upright Align the sides of the pedestal so that they are even with the sides of the washer/dryer. Reach inside the pedestal opening and securely tighten all four pedestal screws. 2. Prepare pedestal feet 1" (25 mm) Tip the washer/dryer back to its upright position. Remove any remaining packaging material. Set the pedestal box aside for use if installing another pedestal. Once both the washer and dryer have been installed, dispose of/recycle all packaging material. Level the washer/dryer 1. Move close to final location Using a 1/4" hex head ratchet or open-end wrench, lower the feet approximately 1" (25 mm) away from the bottom of the pedestal. Follow the installation instructions that came with your model to finish installing or reinstalling your washer/dryer (i.e., hoses, vents, etc.). NOTE: Be sure to remove the transport bolts from the back of the washer. 7