Maytag MVWX700AG Use & Care Guide - Page 9

9. Select cycle modifiers 11. Select START/Pause/Unlock to begin wash cycle Once you select a cycle, the default settings for that cycle will be lit. Press the cycle modifiers buttons to change the Temperature, Soil Level, and Spin Speed, if desired. NOTE: Always read and follow fabric care labels instructions to avoid damage to your garments. Wash Temp Suggested Fabrics Hot Some cold water is added to save energy. This may be cooler than your hot water heater setting. Whites and pastels Durable garments Heavy soils Warm Some cold water will be added, so this may be cooler than what your previous washer provided. Bright colors Moderate to light soils Cool Warm water is added to assist in soil removal and to help dissolve detergents. Cold Warm water may be added to assist in soil removal and to help dissolve detergents. Colors that bleed or fade Light soils Dark colors that bleed or fade Light soils Tap Cold This is the temperature from your faucet. Dark colors that bleed or fade Light soils Press START/Pause/Unlock button to start the wash cycle. Filling is delayed for several minutes while load balance is sensed. When the cycle has finished, the DONE indicator will light and the end of cycle signal will sound (if set). Promptly remove garments after cycle has completed to avoid odor, reduce wrinkling, and rusting of metal hooks, zippers, and snaps. Unlocking the lid to add garments If you need to open the lid to add 1 or 2 missed garments: Press START/Pause/Unlock; the lid will unlock once the washer movement has stopped. This may take several minutes if the load was spinning at high speed. Then close lid and press START/ Pause/Unlock again to restart the cycle. If lid is left open for more than 10 minutes the water will pump out. Delay in water fill Fillling is delayed for 2 to 3 minutes to check for load unbalance. You will hear the hum of the spin prior to filling. This is normal operation. 10. Select cycle options Select any other cycle options you may wish to add, if not previously set. Some cycles will automatically add certain options such as Prewash or Extra Rinse. These can be turned off, if desired. NOTE: Not all options are available with all cycles. 9