McAfee DTP-165C-DPVG Installation Guide - Page 27

Installing or upgrading software on model 1650 and 3650 appliances Upgrade to 9.2.0 on legacy appliances 4 6 Restart the system. # reboot 7 Log on to the McAfee DLP device as root, go to the installation directory, and verify the installation with the command: # cat /data/stingray/etc/version If the Release field contains 9.2.0, installation is complete. Upgrade to 9.2.0 on legacy appliances You can upgrade to any of the products on model 1650 or 3650 appliances by upgrading a 9.0.x systems to 9.0.4 before upgrading to 9.2.0. When that is done, apply any existing hotfixes. Before you begin Download the patch and hotfix, then copy them to the /tmp/ directory of the appliance. Stop all scans and search tasks before upgrading, and wait until they are completely stopped before proceeding. If the patch installation fails, do not install it again. Call McAfee support and submit an installation log file. Task 1 Log on to the appliance as root. 2 Check the current version. # cat /data/stingray/etc/version 3 Make a directory for the patch, check its location, then expand the archive into the new directory. # mkdir -p /data/patch_9.0.4/686712_i # ls -l /tmp patch_686712_45025_02_i.tar.gz # tar zxvf /tmp patch_686712_45025_02_i.tar.gz -C /data/patch_9_0_4/686712 _i 4 Go to the patch directory, then find and read the README file. # cd /data/patch_9_0_4/686712_i # ls -l # cat README Follow the installation steps in the README file. 5 Restart if prompted, or continue to the next step when prompted. 6 Make a directory for the hotfix, check its location, then expand the archive into the new directory. # mkdir -p /data/hotfix # ls -l /tmp hotfix_719847_45561_01.tar.gz # tar zxvf /tmp hotfix_719847_45561_01.tar.gz -C /data/hotfix Do not install the hotfix until the upgrade to 9.2.0 is complete. McAfee Data Loss Prevention 9.2.0 Installation Guide 27