McAfee M-1250 Upgrade Guide - Page 43
Performing Signature Set and Sensor Software upgrade, Difference between an update and an upgrade
View all McAfee M-1250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
5 Performing Signature Set and Sensor Software upgrade This section contains information on how to upgrade the Sensors from 5.1 to 6.0. Before you proceed with the Sensor software upgrade, you must upgrade the Manager to 6.0. See Upgrading the Manager. For I-series Sensors, the NAC feature is not supported in 6.0. So, an I-series Sensor configured for NAC in 5.1, does not enforce NAC when you upgrade it to 6.0. If you have I-series Sensors configured for NAC, and if you want to upgrade to 6.0, contact McAfee Support. Contents Difference between an update and an upgrade Sensor upgrade requirements Reviewing the upgrade considerations Updating Sensor software image Difference between an update and an upgrade A software update is a minor release of device software. A device refers to a Sensor or an NTBA Appliance as applicable. An upgrade indicates a major release and new feature set. These processes are identical, and thus this section makes references to update and upgrade in an interchangeable manner. Any change to device software-whether update or upgrade-requires you to reboot the device. Sensor upgrade requirements This section details the requirements to upgrade the software of a Sensor from 5.1 to 6.0. Minimum required Sensor software versions To upgrade a Sensor to 6.0, its current software must be of the version below: Sensor type I-series Sensors M-1250 and M-1450 Required software version 5.1.5.90 or above 5.1.7.73 or above McAfee® Network Security Platform 6.1 Upgrade Guide 43