Meade TE256W User Manual - Page 9

VIEWING REMOTE (CHANNEL) TEMPERATURE AND HUMIDITY Static Display: • Press the CHANNEL button to select measurements from different remote sensors, each is MODE to a unique channel 1, 2 or 3. Channel Auto-Scan Display: • To enable an automatic scan of all channels, press and hold CHANNEL, until the icon is displayed. The measurements from each remote channel will be alternately displayed with a 5 seconds viewing. NOTE: the channel auto-scan feature can be activated only if there are more than one remote sensors operating and are set to different channels. PROGRAMMING TEMPERATURE IN CELSIUS OR FAHRENHEIT • Press and hold MODE button for 3 seconds to toggle the temperature unit in Celsius (ºC) or Fahrenheit (ºF). SETTING TEMPERATURE ALARM • Press down button to select temperature display. • Press ALARM button selecting the desired alarm, the upper temperature alert with icon (if disabled, displays OFF), or lower temperature alert with icon (if disabled, displays OFF). • Press and hold ALARM button until the temperature digits flashing. • Adjust the temperature digits using the UP (? ) or DOWN (? ). Press and hold either button for fast digits advance • Press the ALARM to confirm selection and return to the temperature alarm selection screen ACTIVATING OR DEACTIVATING TEMPERATURE ALARMS • Once the above alerts are displayed, press the UP (? ) or DOWN (? ) to enable or disable the corresponding alert. VIEWING MAXIMUM AND MINIMUM READINNGS Press the MEM button recalling: • Current temperature and humidity • Minimum temperature and humidity • Maximum temperature and humidity RESETTING TEMPERATURE MEMORIES Press and hold MEM button for 3 seconds to clear all channel memories. COMFORT LEVEL INDICATION The main unit is capable of detecting and displaying the current indoor comfort levels of surrounding environment. The comfort level based on the combination of the current indoor temperature and humidity readings. The following comfort levels may be displayed: COMFORT (comfortable); WET (wet) and DRY (dry) Indicator Temperature Humidity displayed Range Range Shows current condition COM 20°C to 25°C 40%RH- Ideal relative humidity (68°F to 77°F) 70%RH and temperature WET DRY -5°C to 50°C (23°F to122°F) 5°C to 50°C (23°F to122°F) OVER 70%RH BELOW 40%RH Contains excess moisture Contains inadequate moisture 9