Memorex MC2864 User Guide - Page 23

Troubleshooting Guide - problems

Page 23 highlights

TROUBLESHOOTING GUIDE If you experience a problem with this unit, check the chart below before calling for service. SYMPTOM Unit will not turn on. Disc will not play. No sound. Erratic playback. Time reset to "12:00". Alarm does not turn on. CAUSE AC cord not connected. CD Compartment door not closed. Disc inserted incorrectly. Dirty or defective CD. Moisture condensation on disc. Volume setting is set to minimum. Defective disc. Dirty or defective disc. Batteries connected improperly, not connected or dead. Clock not set. Alarm is not activated or set properly. Clock is not set. SOLUTION Check AC cord connection. Close CD Compartment door. Reinsert disc correctly. Try another disc. Wipe disc with soft cloth. Increase volume. Try another disc. Clean or replace disc. Check the batteries. Set the clock. Set and activate alarm as described on page 16. Set the clock. AM or FM, no sound. Power is not on. Volume setting is set to minimum. 22 Press POWER button to turn the unit on. Increase volume.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25

22
TROUBLESHOOTING GUIDE
SYMPTOM
CAUSE
SOLUTION
Unit will not
AC cord not
Check AC cord
turn on.
connected.
connection.
Disc will not play.
CD Compartment
Close CD Compartment
door not closed.
door.
Disc inserted
Reinsert disc correctly.
incorrectly.
Dirty or defective CD.
Try another disc.
Moisture
Wipe disc with soft cloth.
condensation on disc.
No sound.
Volume setting is
Increase volume.
set to minimum.
Defective disc.
Try another disc.
Erratic playback.
Dirty or defective
Clean or replace disc.
disc.
Time reset to “12:00”.
Batteries connected
Check the batteries.
improperly, not con-
nected or dead.
Clock not set.
Set the clock.
Alarm does not
Alarm is not activated
Set and activate alarm as
turn on.
or set properly.
described on page 16.
Clock is not set.
Set the clock.
AM or FM, no sound.
Power is not on.
Press POWER button
to turn the unit on.
Volume setting is
Increase volume.
set to minimum.
If you experience a problem with this unit, check the chart below before calling
for service.