Memorex MP8806 User Guide - Page 8

This unit is designed to operate on AC household current or DC (batteries). POWER SOURCES AC Use the AC polarized line cord included with the unit for operation on AC power. Insert one end of the AC line cord into the AC Power jack on the rear of the unit and the other end (with the 2 blades) into a conveniently located AC outlet having 120V, 60Hz. When the AC cord is plugged in, the batteries will AC Outlet be disconnected. NOTE: The AC plug supplied with the unit is polarized to help minimize the possibility of electric AC Plug shock. If the AC plug does not fit into a nonpolarized AC outlet, do not file or cut the wide blade. It is the user's responsibility to have an electrician replace the obsolete outlet. BATTERY INSTALLATION To use this unit with battery power, remove the Battery Compartment door on the bottom of the unit by sliding it out, then lifting it off. Insert six (6) "C" size batteries following the diagram in the compartment. NOTE: The AC power cord must be disconnected from the AC Power jack on the rear of the unit in order for the unit to operate on battery power. + + - + + - + + - Follow these precautions when using batteries in this device: 1. Use only the size and type of batteries specified. 2. Be sure to follow the correct polarity when installing the batteries as indicated in the battery compartment. Reversed batteries may cause damage to the device. 3. Do not mix different types of batteries together (e.g. Alkaline, Rechargeable and Carbon-zinc) or old batteries with fresh ones. 4. If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from possible battery leakage. 5. Do not try to recharge batteries not intended to be recharged; they can overheat and rupture. (Follow battery manufacturer's directions.) BATTERY PRECAUTIONS 7