Memorex MVDP1072 User Guide - Page 41

FUNCTION SETUP Audio Setup Audio Setup Page Audio Mode Stereo EQ Type Off Sound Field Off SPDIF Output RAW LPCM Out 48K Dolby Digital Setup 1. Audio output mode: Set the audio output mode to make the multi-channel audio into two-channel outputs. Optional settings: LT/RT, STEREO, V SURR. Default: STEREO 2. EQ type: To set EQ modes. Optional settings: Off, ROCK, Pop, Live, Dance, Techno, Classic, Soft. Default: Off. 3. Sound Field: To set different sound field effects. Optional settings: Off, Concert, Living room, Hall, Bathroom, Cave, Arena, Church. Default: Off. 4. SPDIF Output: To set the bit stream type of the digital output. Optional settings: SPDIF/RAW, SPDIF/PCM. Default: SPDIF/RAW. 5. LPCM Out To set the output frequency of the 96K LPCM audio data to fit for different power amplifiers. Optional settings: 48K, 96K. Default: 48K. 6. Dolby Digital setup: A. L+R: To set the output means of the left or right audio when playing a Dolby disc with separate two-channel audio Optional settings: Stereo, L-Mono,R-Mono, Mix-Mono. Default: Stereo. B. Dynamic compression: To set the linear compression ratio to get different compression result. Optional settings: OFF 1/8 1/4 3/8 1/2 5/8 3/4 7/8 FULL Default: OFF. 36