Memorex MiKS2210 User Guide - Page 13

OPERATION (CONTINUED) REPEAT PLAYBACK 1 2 3 1 3 2 1 2 1 4 2 To repeat a single track, while in the Stop mode, press the REPEAT button ‚ once; the RPT indicator will blink. Press the Skip/Search ( ) ƒ or ( ) „ button to select the specific track that you wish to repeat. When the desired track number blinks in the display, within five seconds, press the PLAY/PAUSE (® ) button … to begin playback. The PLAY indicator will light and the specific track you selected will be repeated continuously. To repeat all of the tracks on a disc continuously, while in the Stop mode, press the REPEAT button ‚ twice; the RPT indicator will light. Press the Play/Pause (® ) button ƒ to repeat all tracks; the PLAY indicator will light. To cancel Repeat Playback, press the REPEAT button ‚ until the REPEAT indicator goes out. You can also stop Repeat Playback by pressing the Stop (I) button ƒ. PROGRAMMED PLAYBACK The CD player in this unit has a 20 track programmable memory that allows you to program up to 20 tracks on any disc for playback in any desired order. You may program 20 different tracks or you may also program certain tracks to play more than once. To perform programmed playback, proceed as follows: 1 2 3 1 2 Turn this unit on by pressing the POWER button 1; the POWER indicator will light. Rotate the FUNCTION control 2 to select CDG mode. Press the CD OPEN/CLOSE area to open the CD compartment door. Place a CD on the center spindle, with the printed label side facing up. Close the CD compartment door. Press the PROGRAM button; "0" will blink in the display and the PROG indicator will blink. PROGRAMMED PLAYBACK C1 ONT1INUED ON THE NEX1T PA1GE 12