Metabo ASR 35 ACP HEPA Operating Instructions - Page 17
Special safety instructions for, ASR 35 L ACP
View all Metabo ASR 35 ACP HEPA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
the dust collection containers, must only be carried out by qualified specialists wearing appropriate protective clothing and equipment. Do not operate the device without the complete filtration system. During discharge and maintenance operations, note the following: Clean the device before opening it. Wear a dust mask. Avoid exposing third parties to dust. Provide local filtered forced ventilation. Then clean the maintenance area. Do not operate the device without the complete filtration system. (filter cassettes and PE disposal bags). According to tests carried out as per EN 60335 section 1 and 69, the device also meets electrical safety requirements relating to the extraction of a water-air mixture. WARNING - Do not reuse the filter cassettes after they have been removed from the machine. Special safety instructions for ASR 35 L ACP: Warning sign for machines with dust class L: ENGLISH en inhalation of the dust may cause allergic reactions and/or respiratory diseases to the operator or bystanders. Certain kinds of dust are classified as carcinogenic such as oak and beech dust especially in conjunction with additives for wood conditioning (chromate, wood preservative). 5. Overview See page 3. 1 Suction power regulator * 2 Rotary switch On/Off/Automatic/ACP 3 Volume flow control display 4 Plug socket for power tool 5 Rotary switch for selecting the extraction hose diameter * 6 PE disposal bag * 7 Fleece filter bag * 8 Upper part 9 Snap lock 10 Container 11 Cable holder (fold it back and use it to suspend the mains connection lead) 12 Sealing plug (for ASR 35 M ACP, ASR 35 H ACP only) * 13 Suction opening 14 Locking bar (for opening the hood to change filter cassettes) 15 Locking knob 16 Motor protection filter 17 Filter cassette (according to IFA C) * depending on equipment/not included in scope of delivery 6. Commissioning Before plugging in, check that the rated mains voltage and mains frequency, as stated on the type plate match your power supply. While the device is suitable for extracting substances that pose a 6.1 Securing the sealing plug (only for ASR 35 M ACP, ASR 35 H ACP) slight threat to health, it is not appropriate for reducing wood dust Fit the chain of the sealing plug (12) to the inner diameter of the suction opening (13). in inhaled air. 6.2 Inserting a Fleece Filter Bag Dust from material such as paint containing lead, some wood species, minerals and metal may be harmful. Contact with or Permitted for devices of dust class L and M (for low-dust disposal) Switch off the device, remove the mains plug and open the snap locks (9). Remove the upper part (8) of the device from the container (10). 17