Metabo BHA 18 LTX Operating Instructions 2 - Page 13

17027010_0311 BHA 18 LT LTX 36 LTX Compact.book Seite 13 Donnerstag, 10. März 2011 10:29 10 ENGLISH ENG 8.6 On/Off switch, setting the speed Switching on, speed: press the trigger (9) . The speed can be changed by pressing in the trigger. Switching off: release the trigger (9) . 8.7 Operating mode selection Do not activate the switch button (4) unless the motor has completely stopped! Select the desired operating mode by turning the switch button (4). To turn, push in the lock (5). Drilling Hammer drilling Avoid levering with the machine when a drill bit is fitted. 8.8 Tool change with SDS chuck Before fitting, clean tool shank and apply special grease (accessories order no. 6.31800)! Use only SDS-plus tools. Inserting the tool: Turn the tool while inserting until it locks into place. The tool is locked automatically. Removing the tool: When drilling in tiles and other brittle materials: Set the operating mode to "Drilling". 10 Maintenance The vent slots of the machine should be cleaned periodically. 11 Accessories Use only genuine Metabo accessories. If you need any accessories, check with your dealer. The dealer needs to know the exact model designation of your power tool in order to select the correct accessory. See page 4. A Chargers B Battery packs with different capacities. Use battery packs only with voltage suitable for your power tool. C Metabo carrying strap D Tools with SDS-Plus shank E Connecting piece F Geared chuck G Twist drills for metal and wood H Screwdriver bit I Special grease (for lubricating the tool shanks) For a complete range of accessories, see www.metabo.com or the main catalogue. 12 Repairs Turn tool lock (2) in direction indicated by arrow (a) and remove tool (b). 9 Tips and Tricks Only moderate pressure is required for hammer drilling. Applying a high degree of pressure does not increase performance. When drilling deep holes, remove the drill bit periodically from the hole to remove dust. Repairs to electrical tools must be carried out by qualified electricians ONLY! If you have Metabo electrical tools that require repairs, please contact your Metabo service centre. For addresses see www.metabo.com. You can download spare parts lists from www.metabo.com. 13 Environmental Protection Metabo's packaging can be 100% recycled. Scrap power tools and accessories contain large amounts of valuable resources and plastics that can be recycled. These instructions are printed on chlorine-free bleached paper. 13