Metabo BHA 18 LTX Operating Instructions 3 - Page 9

Original instructions ENGLISH en 1. Declaration of Conformity Work only with the additional handle correctly installed. We, being solely responsible, hereby declare that this product conforms to the standards and directives specified on page 3. 2. Specified Use With the appropriate accessories this cordless rotary hammer drill is suitable for impact drilling with impact masonry bits into concrete, stone and other such materials, as well as for non-impact drilling into metal, wood etc. and for driving screws. The rotary hammer can be carried with the fitted Metabo carrying strap. Always hold the machine with both hands using the handles provided, stand securely and concentrate. A damaged or cracked additional handle must be replaced. Never operate a machine with a defective additional handle. Metabo S-automatic safety clutch. When the safety clutch responds, switch off the machine immediately! If the tool jams or catches, the power supply to the motor is restricted. Due to the strong force which can arise, always hold the machine with both hands using the handles provided, stand securely and concentrate. Do not touch the rotating tool! The user bears sole responsibility for any damage Remove chips and similar material only with the caused by improper use. machine at a standstill. Generally accepted accident prevention regulations and the enclosed safety information must be observed. 3. General Safety Instructions For your own protection and for the protection of your electrical tool, pay attention to all parts of the text that are marked with this symbol! WARNING - Reading the operating instructions will reduce the risk of injury. WARNING Read all safety warnings and instructions. Failure to follow all safety warnings and instructions may result in electric shock, fire and/or serious injury. Keep all safety instructions and information for future reference. Pass on your electrical tool only together with these documents. 4. Special Safety Instructions Caution must be exercised when driving screws into hard materials (driving screws with metric or imperial threads into steel)! The screw head may break or a high reverse torque may build up on the handle. Dust from material such as paint containing lead, some wood species, minerals and metal may be harmful. Contact with or inhalation of the dust may cause allergic reactions and/or respiratory diseases to the operator or bystanders. Certain kinds of dust are classified as carcinogenic such as oak and beech dust especially in conjunction with additives for wood conditioning (chromate, wood preservative). Material containing asbestos must only be treated by specialists. - Where the use of a dust extraction device is possible it shall be used. - The work place must be well ventilated. - The use of a dust mask of filter class P2 is recommended. Follow national requirements for the materials you want to work with. Protect battery packs from water and moisture! Do not expose battery packs to naked flame! Wear ear protectors. Exposure to noise can cause hearing loss. Use the additional handle supplied with the tool. Loss of control can cause personal injury. Hold the power tool by the insulated gripping surfaces when performing an operation where the Do not use faulty or deformed battery packs! Do not open battery packs! Do not touch or short-circuit battery packs! Slightly acidic, flammable fluid may leak from defective Li-ion battery packs! cutting accessory may contact hidden wiring or its own cord. Cutting accessory contacting a "live" wire may also energise metal parts of the power tool, resulting in an electric shock. If battery fluid leaks out and comes into contact with your skin, rinse immediately with plenty of water. If battery fluid leaks out and comes into contact with your eyes, wash them with clean water and Always wear protective goggles, gloves, a dust seek medical attention immediately. mask and sturdy shoes when working with this tool. Remove the battery pack from the machine before any Ensure that the spot where you wish to work is free adjustments, conversions or servicing are performed. of power cables, gas lines or water pipes (e.g. using a metal detector). Before fitting the battery pack, make sure that the machine is switched off. Secure small workpieces, e.g. by clamping in place with screw clamps. 9