Metabo MAG 50 Operating Instructions 2 - Page 9

ENGLISH ENG Original instructions Dear Customer, Thank you for the trust you have placed in us by buying a Metabo power tool. Each Metabo power tool is carefully tested and subject to strict quality controls by Metabo's quality assurance. Nevertheless, the service life of a power tool depends to a great extent on you. Please observe the information contained in these instructions and the enclosed documentation. The more carefully you treat your Metabo power tool, the longer it will provide dependable service. Contents Generally accepted accident prevention regulations and the enclosed safety information must be observed. 1 Declaration of Conformity 2 Specified Conditions of Use 3 General Safety Instructions 4 Special Safety Instructions 5 Overview 6 Initial Operation 6.1 Assembly 6.2 Power-supply connection 7 Use 7.1 Installing safety chain 7.2 Switching on / switch-on sequence 7.3 Switching off drill 7.4 Switching off magnet 7.5 Mounting on the workpiece 7.6 Drilling 8 Cleaning, Maintenance 9 Troubleshooting 10 Accessories 11 Repairs 12 Environmental Protection 13 Technical Specifications 1 Conformity Declaration We, being solely responsible, hereby declare that this product conforms to the standards and directives specified on page 2. 2 Specified Use The magnetic drill stand is designed for use with the Metabo drill B 32/3. The magnetic drill stand is designed for fastening to magnetisable metal and must therefore have perfect adhesion. In conjunction with the supplied safety chain, also suitable for working on vertical and angled surfaces and overhead. The user bears sole responsibility for damage caused by improper use. 3 General Safety Instructions WARNING - Reading the operating instructions will reduce the risk of injury. WARNING Read all safety warnings and instructions. Failure to follow all safety warnings and instructions may result in electric shock, fire and/or serious injury. Keep all safety instructions and information for future reference. Before using the power tool, carefully read through and familiarise yourself with all the enclosed safety information and the Operating Instructions. Keep all enclosed documentation for future reference, and pass on your power tool only together with this documentation. 4 Special Safety Instructions For your own protection and for the protection of your power tool pay attention to all parts of the text that are marked with this symbol! When working on angled and vertical surfaces and overhead, the magnetic drill stand must be secured with the supplied clamping chain so that it cannot fall down if the power supply is interrupted. When switching of the magnet, or if the power supply is interrupted, the magnet loses it holding power. The device executes a dangerous heaving movement. Always wear a hard hat when working overhead. Always wear a safety harness when working on scaffolds. Always wear protective goggles, gloves, and suitable shoes when working. Ensure there is no damage to the mains connection cables, switch and anti-kink device. The magnet produces magnetic and electromagnetic fields that can have a negative effect on medical implants. 9