Miele Boost CX1 Parquet Operating instructions/Installation instructions - Page 43
EcoTeQ Plus floorhead
![]() |
View all Miele Boost CX1 Parquet manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
en-CA Place the insertion aids that are located on both sides of the new exhaust filter into the guides on the exhaust filter compartment (Fig. 43). Push the exhaust filter back and up. Press the exhaust filter firmly into position until it clicks into place. If you have fitted your vacuum cleaner with a HEPA AirClean exhaust filter, press the TimeStrip® filter change indicator (Fig. 09). After approx. 10-15 seconds a thin red line will appear in the left-hand side of the display (Fig. 10). Fit the exhaust filter compartment flap carefully in the bottom of the exhaust filter compartment and close the flap, making sure it clicks into position (Fig. 11). Replacing the thread lifters (Fig. 44) (not possible on models with EcoTeQ Plus floorhead) The thread lifters on the suction inlet to the floorhead can be replaced. Replace the thread lifters if the pile has worn down. Lift the thread lifters out of the slots. To do so use a suitable tool, e.g., a flat-head screwdriver. Install new thread lifters. Replacement parts are available from your Miele dealer or through Miele Service. Maintenance Risk of electric shock from voltage. The supply voltage is applied to the appliance even if it is switched off. Before cleaning, unplug the appliance from the electrical socket. Vacuum cleaner and accessories Risk of electric shock from voltage. If moisture gets into the vacuum cleaner, there is a risk of electric shock. Do not let the vacuum cleaner get wet. Follow the special cleaning instructions for the fine dust filter and the filter mat (see "Maintenance" - "Cleaning the fine dust filter"). The vacuum cleaner and all plastic accessories can be cleaned with a commercially available cleaner suitable for plastic. Damage due to unsuitable cleaning agents. All surfaces are susceptible to scratching. Contact with unsuitable cleaning agents can alter or discolour the external surfaces. Do not use abrasive cleaning agents, glass cleaning agents, all-purpose cleaners, or oil-based conditioning agents. 43
![](/manual_guide/products/miele-boost-cx1-snrf0-operating-instructionsinstallation-instructions-d04aae2/43.png)