Miele CM 6350 Operating instructions - Page 56

Cleaning and care Stainless steel milk flask (CM 6350) The milk flask should be taken apart and cleaned every day.  Clean all parts by hand only using warm water and dishwashing liquid. Use the cleaning brush supplied to remove milk residue from the milk pipework if necessary.  Rinse all parts carefully under running water. Residual dishwashing liquid can affect the taste of milk from the appliance and the quality of the milk froth.  Dry all parts thoroughly.  Reassemble the milk flask. Milk pipework  Make sure that the milk pipework is cleaned regularly and thoroughly. Milk contains natural bacteria that will multiply if the pipework is not sufficiently clean. Contamination in the coffee machine can be a health hazard. The milk pipework must be cleaned at least once a week. A message in the display will prompt you when this needs to be done.  Confirm the message with OK. When you confirm the message Clean milk pipework with OK, the internal counter for the cleaning interval will be reset. You will not be reminded again. There are two options for cleaning the milk pipework: - You can remove and dismantle the central spout with its integrated cappuccinatore and either wash it in the dishwasher or by hand with hot water and a little washing-up liquid (see "Central spout with integrated cappuccinatore"). - Or you can clean the milk pipework using the Clean milk pipework maintenance program together with the Miele cleaning agent for milk pipework (see "Maintenance program - Cleaning the milk pipework"). 56