Miele CVA 6401 Product Manual - Page 1
Miele CVA 6401 Manual
View all Miele CVA 6401 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
Cleaning and care Descaling Cleaning the milk pipework The milk pipework must be cleaned with the original Miele cleaning agent for milk pipework. Cleaning takes approx. 7 minutes. You need one sachet of the Miele cleaning agent for milk pipework. The cleaning process cannot be canceled once it has started. The process has to be carried through to the end. ĺĺ Tap and select "Maintenance" and then "Clean milk pipework." Then tap the OK button. The cleaning process will start. ĺĺ Follow the instructions in the display. Degreasing the brew unit After 200 portions have been dispensed, "Degrease the brew unit" will appear in the display. This message will not go out until the brew unit has been degreased. You need 1 Miele cleaning tablet to degrease the brew unit. The process takes approx. 10 minutes. The cleaning process cannot be canceled once it has started. The process has to be carried through to the end. ĺĺ Tap and select "Maintenance" and then "Degrease the brew unit." Then tap the OK button. The process will start. ĺĺ Follow the instructions in the display. When "Place a cleaning tablet in the ground coffee chute and close" appears in the display: Descaling must be carried out and takes approx. 20 minutes. ĺĺ You will need 2 descaling tablets. The cleaning process cannot be canceled once it has started. The process has to be carried through to the end. ĺĺ Tap and select "Maintenance" and then "Descale the appliance." Then tap the OK button. The descaling process will now start. ĺĺ Follow the instructions in the display. ĺĺ Fill the water container with lukewarm water up to the symbol and add 1 sachet of the Original Miele cleaning agent for milk pipework. Push the water container back into the machine. When "Rinse and refill the water container" appears in the display: ĺĺ remove the water container and rinse it carefully with clean water. Ensure that no cleaning agent is left in the water container. The cleaning process is finished when "Process complete" appears in the display. ĺĺ Remove the coffee chute cover and open the lid of the coffee chute. Place a cleaning tablet in the coffee chute. ĺĺ Follow the further instructions given in the display. The degreasing process is finished when "Process complete" appears in the display. ĺĺ Fill the water container with lukewarm water up to the symbol and drop 2 descaling tablets in it. Push the water container back into the machine. Follow the instructions on the packet for the mixing ratio carefully. It is important that you fill the water container with the correct amount of water (not less or more), otherwise descaling will be cut short and must then be repeated. The descaling program will otherwise be canceled prematurely and will need to be repeated. When "Rinse the water container and fill with fresh tap water up to the descaling sym- bol " appears in the display, ĺĺ remove the water container and rinse it carefully with clean water. Ensure that no descaling solution residue remains in the water container. The descaling program is finished when "Process complete" appears in the display. CLEANING AND CARE / DESCALING TIPS FOR USE SETTINGS Tips for use Changing the portion size The changed portion size is always saved in the current profile. The name of the current profile is shown in the top left of the display. Changing the portion size during drink preparation ĺĺ Place the desired cup under the main dispenser. ĺĺ Tap and hold the button for the desired drink until "Change" appears in the display. If you want to change portion sizes for Cappuccino, Latte macchiato or Caffè latte, the ingredients will be shown in the display. Cappuccino Milk froth, espresso Latte Hot milk, milk froth, es- macchiato presso Caffè latte Hot milk, coffee ĺĺ Select all ingredients for which you wish to alter the portion size. Use the OK button to confirm your individual selections. ĺĺ Use the arrow keys to highlight "Start". Then tap the OK button. The drink will be prepared and "Save" will appear in the display. When the quantity for each ingredient reaches the level you want, tap the OK button. ĺĺ Save the required portion size for the selected ingredients. The programmed composition and the portion size will now be dispensed every time that particular drink is selected. Tip: You can cancel portion size programming as long as "Stop" is visible in the display. Calling and changing portion sizes in the "Parameters" menu ĺĺ Tap . ĺĺ Select the desired drink and confirm with OK. ĺĺ Select "Portion size" and tap the OK but- ton. From this point onwards, the procedure is identical to programming the portion size during drink preparation. Setting the portion size for different profiles ĺĺ Tap "Profile" and select the profile you want. Now you can either set the portion size by selecting "Portion size" in the "Parameters" menu or set it while making a drink. Profiles You can create profiles and save the portion sizes for Espresso, Coffee and Long Coffee for each profile. The name of the current profile is shown in the top left of the display. Accessing a profile ĺĺ Tap "Profile". Creating a profile Enter characters Select with the arrows + OK Save entry Select with the arrows + OK Delete characters Button If you have already created a profile, the following options are available to you: -- Select profile -- Change name -- Delete profile -- Change profile (The coffee machine changes the profile manually, after a drink is dispensed, or when the machine is turned on.) Settings Changing settings ĺĺ Tap "Settings". ĺĺ Select the required setting with the arrow keys and confirm with OK. Options which are currently selected will have a check next to them. ĺĺ Change the setting using the arrow keys. ĺĺ Tap the OK button to save the setting. Tapping takes you back to the previous menu. Menu item Language Time of day Date Timer Eco mode Lighting Info System lock Water hardness Display brightness Volume Showroom program Factory settings Mains water Available settings German, English, other languages Country Display (On / Off / Night dimming) Clock format (12 h / 24 h) Set Year / Month / Day Timer 1 (Turn on at, Turn off at, Turn off after) Timer 2 (Turn on at, Turn off at) Comments If you select the wrong language by mistake, you can find the "Language" option by following the symbol. Depending on which option you select, the machine may use more energy. A message about this will appear in the display. For "Turn on at" and "Turn off at" to be set, the timer must be activated and at least one day of the week must be allocated. On / Off Brightness (machine turned on or turned off) Turn off after On / Off Soft, medium, hard, very hard Set Signal tones Keypad tones Demo mode (On / Off) Reset Do not reset On / Off To turn off the lighting, tap the arrow key until no segments are filled and "Turned off" appears. Number of drinks "No. of portions until appliance needs descaling" / "No. of portions until brew unit needs degreasing" When the system lock is activated, the "Turn on at" option for the timer cannot be selected. To turn off the tones, tap the arrow key until no segments are filled and "Turned off" appears. Intended only for presentations in stores. For private use, this function is not required. (Only for CVA 6405) Quick Start Guide Built-in Coffee System This quick guide is not a substitute for the Operating and Installation Instructions. It is essential to read the operating and Installation Instructions to familiarize yourself with how to use the coffee machine before using it for the first time. For this reason, read the Operating and Installation Instructions carefully while paying particular attention to the IMPORTANT SAFETY INSTRUCTIONS. en - US, CA M.-Nr. 09 741 530