Miele CVA 6405 Product Manual - Page 67

Unsatisfactory result, Problem, Possible cause and remedy

Page 67 highlights

Unsatisfactory result Frequently asked questions Problem Possible cause and remedy The consistency of The milk temperature is too high. Good milk froth is the milk froth is prepared with cold milk (< 55°F/13°C). unsatisfactory. ^ Check the milk temperature in the milk container. The milk pipework or the air intake hose is clogged. ^ Follow the instructions in chapter "Cleaning clogged milk pipework". The grinding of the The coffee bean container has run empty during the coffee beans grinding process. sounds louder than usual. ^ Fill the coffee bean container with fresh beans. There might be pebbles mixed in with the coffee beans. ^ Turn the coffee machine off immediately. Contact Miele Technical Service. Espresso or coffee The grind level is too coarse. flows into the cup ^ Set the grinder control to a finer setting (see "Adjusting the too quickly. grinder setting"). Espresso or coffee The grind level is too fine. flows into the cup ^ Set the grinder control to a coarser setting (see "Adjusting too slowly. the grinder setting"). The coffee or The cup has not been pre-heated. espresso is not hot enough. The brewing temperature is set too low. ^ Set a higher brew temperature (see "Brewing temperature"). The brew unit filters are blocked. ^ Remove the brew unit and clean it by hand (see "Brew unit" ). ^ Degrease the brew unit (see "Brew unit"). 67

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88

Unsatisfactory result
Problem
Possible cause and remedy
The consistency of
the milk froth is
unsatisfactory.
The milk temperature is too high. Good milk froth is
prepared with cold milk (< 55°F/13°C).
^
Check the milk temperature in the milk container.
The milk pipework or the air intake hose is clogged.
^
Follow the instructions in chapter "Cleaning clogged milk
pipework".
The grinding of the
coffee beans
sounds louder
than usual.
The coffee bean container has run empty during the
grinding process.
^
Fill the coffee bean container with fresh beans.
There might be pebbles mixed in with the coffee beans.
^
Turn the coffee machine off immediately. Contact Miele
Technical Service.
Espresso or coffee
flows into the cup
too quickly.
The grind level is too coarse.
^
Set the grinder control to a finer setting (see "Adjusting the
grinder setting").
Espresso or coffee
flows into the cup
too slowly.
The grind level is too fine.
^
Set the grinder control to a coarser setting (see "Adjusting
the grinder setting").
The coffee or
espresso is not hot
enough.
The cup has not been pre-heated.
The brewing temperature is set too low.
^
Set a higher brew temperature (see "Brewing
temperature").
The brew unit filters are blocked.
^
Remove the brew unit and clean it by hand (see "Brew
unit" ).
^
Degrease the brew unit (see "Brew unit").
Frequently asked questions
67