Miele CVA 6800 Product Manual - Page 81
Electrical connection 81, Technical Service Department. See
View all Miele CVA 6800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
Electrical connection Make sure that the power to the machine is OFF before installing or performing maintenance or repairs. All electrical work should be performed by a qualified electrician in strict accordance with national and local safety regulations. Installation, repairs and other work by unqualified persons could be dangerous. WARNING: THIS APPLIANCE MUST BE GROUNDED Important The coffee system comes equipped with a 6 ft (1.8 m) power cord with a NEMA 5-15P molded plug for connection to a 120 V, 15 A, 60 Hz power supply. Verify that the voltage, load and circuit rating information found on the data plate match the household electrical supply before installing the coffee system. Do not connect the appliance to a power inverter or directly to power produced outside of the normal electrical grid (i.e. direct solar or wind power source). Direct connection to such power sources can cause power surges and tripped breakers when the appliance is turned on, and could damage the appliance. Do not connect the appliance to energy saving plugs or outlets. The reduction of power to the appliance caused by these devices will cause the appliance to run hot and may damage it and/or shorten its usable life. If there is any question concerning the electrical connection of this appliance to your power supply, please consult a licensed electrician or contact Miele's Technical Service Department. See back page for contact information. 81