Miele Classic G 4205 Operating and Installation manual - Page 30

Frequently asked questions 30, Technical faults 30

Get Miele Classic G 4205 PDF manuals and user guides View all Miele Classic G 4205 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 30 highlights

Frequently asked questions ,Repairs should only be carried out by a qualified and trained person in accordance with local and national safety regulations. Unauthorized repairs could cause personal injury or machine damage. Technical faults Problem The Start / Stop indicator does not flash after the dishwasher is turned on with "s". The dishwasher stops during a program. The program cycle indicators "Cleaning", "Drying" and "End" flash at the same time. The drain pump is running when the door is open. Possible fault The machine is not plugged in. The fuse has tripped. The fuse has tripped. There may be a technical fault. The waterproof system has activated. Solution Insert the plug. Reset the circuit breaker. See data plate for minimum amperage. Reset the circuit breaker. See data plate for minimum amperage. - Turn the dishwasher off "s". After a few seconds: - Turn the dishwasher on "s". - Select the desired program with the "Program" button. - Press the "Start / Stop" button. If the problem persists, contact Technical Service. - Turn off the water supply. - Contact Miele Technical Service. 30

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
,
Repairs should only be carried out by a qualified and trained person in
accordance with local and national safety regulations. Unauthorized repairs
could cause personal injury or machine damage.
Technical faults
Problem
Possible fault
Solution
The Start / Stop
indicator does not flash
after the dishwasher is
turned on with "
s
".
The machine is not
plugged in.
Insert the plug.
The fuse has tripped.
Reset the circuit breaker.
See data plate for
minimum amperage.
The dishwasher stops
during a program.
The fuse has tripped.
Reset the circuit breaker.
See data plate for
minimum amperage.
The program cycle
indicators "Cleaning",
"Drying" and "End"
flash at the same time.
There may be a technical
fault.
– Turn the dishwasher off
"
s
".
After a few seconds:
– Turn the dishwasher on
"
s
".
– Select the desired
program with the
"Program" button.
– Press the "Start / Stop"
button.
If the problem persists,
contact Technical
Service.
The drain pump is
running when the door
is open.
The waterproof system
has activated.
– Turn off the water
supply.
– Contact Miele
Technical Service.
Frequently asked questions
30