Miele Compact C2 Electro PowerLine - SDCE0 Operating instructions - Page 17
Cleaning and care, Cleaning the floor roller of the floor
View all Miele Compact C2 Electro PowerLine - SDCE0 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
en Exchanging exhaust filters 1. If you wish to replace the a AirClean filter with the b Active AirClean 50 filter or the c HEPA AirClean 50 filter, you must remove the filter frame before inserting the new filter (see fig. 35). The exhaust filter change indicator must also be activated (see fig. 13). 2. If you use an AirClean filter a you must insert it into a filter frame (see fig. 33), see "Optional accessories". Do not use more than one filter at a time. The Active AirClean 50 filter can be used instead of the HEPA AirClean 50 filter and vice versa without any changes. When to change the thread catcher pads of the standard floor brush (depending on model) The thread catcher pads on the bottom of the standard floor brush (depending on model) should be checked occasionally. Replace the pads if they appear worn. Replacing the thread catchers (see fig. 36 + 37) ^ Use a screwdriver or similar object to remove the thread catchers from the slots. ^ Insert the new thread catchers. New thread catcher pads can be purchased from any authorized Miele vacuum dealer or Miele. Cleaning the floor roller of the floor brush AllTeQ (see fig. 38) a Unlock the roller pin with a coin. b Push the pin out and remove it. c Remove the roller. ^ Remove any threads and hair from the roller. ^ Replace roller in the reverse order. Cleaning and care ,Turn off the vacuum and unplug it from the outlet before performing any maintenance work. Vacuum cleaner and accessories The vacuum cleaner and other plastic accessories can be cleaned with a damp cloth or a cleaner suitable for plastics. ,Do not use abrasive, glass or all purpose cleaners, or oil-based conditioning agents! They will damage the surface. Dust compartment The dust compartment can, if necessary, be cleaned using a dry cloth, dusting brush or a second vacuum to remove any dust. Monitor the airflow indicator and inspect all filters regularly. Clean or replace them when necessary according to these Operating Instructions. 17