Miele DA 6690 W Puristic Edition 6000 AM Operating instructions - Page 22

Turning overhead lighting on/off, Power management, Turning power management on/off

Page 22 highlights

Operation (Manual mode) Turning overhead lighting on/ off The overhead lighting can be turned on and off separately from the fan.  Tap the lighting button . Power management The ventilation hood features a power management system to help save energy. The fan power level is reduced and the lighting is turned off automatically. - If the intensive setting is selected, the fan automatically switches to level 3 after 5 minutes. - If the fan is set to level 3, 2 or 1, it switches back one fan setting after 2 hours and then in 30-minute intervals until the fan eventually switches off. - If the overhead lighting is on, it automatically turns off after 12 hours. Turning power management on/off  Turn off the fan and the lighting.  Press the delayed shut down button  for approx. 10 seconds until 1 lights up in the fan power display.  Next, tap the following buttons in succession: - The lighting button , - Followed by the 1 button and then - The lighting button  again. If power management is turned on, the 1 and IS indicators will be continuously lit. If it is switched off, 1 and IS will flash.  Tap 1 to turn off the power management. The 1 and IS indicators will flash.  Touch IS to turn it on. The 1 and IS indicators are constantly lit.  Confirm the setting by pressing the delayed shut down button . All the indicator lights will go out. If the setting is not confirmed within 4 minutes, the hood automatically reverts to the old setting. 22

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48

Operation (Manual mode)
22
Turning overhead lighting on/
off
The overhead lighting can be turned on
and off separately from the fan.
Tap the lighting button
.
Power management
The ventilation hood features a power
management system to help save
energy. The fan power level is reduced
and the lighting is turned off
automatically.
If the intensive setting is selected, the
fan automatically switches to level 3
after 5 minutes.
If the fan is set to level 3, 2 or 1, it
switches back one fan setting after 2
hours and then in 30-minute intervals
until the fan eventually switches off.
If the overhead lighting is on, it
automatically turns off after 12 hours.
Turning power management on/off
Turn off the fan and the lighting.
Press the delayed shut down button
for approx. 10 seconds until
1
lights up in the fan power display.
Next, tap the following buttons in
succession:
The lighting button
,
Followed by the
1
button and then
The lighting button
again.
If power management is turned on, the
1
and
IS
indicators will be continuously
lit.
If it is switched off,
1
and
IS
will flash.
Tap
1
to turn off the power
management.
The
1
and
IS
indicators will flash.
Touch
IS
to turn it on.
The
1
and
IS
indicators are constantly
lit.
Confirm the setting by pressing the
delayed shut down button
.
All the indicator lights will go out.
If the setting is not confirmed within 4
minutes, the hood automatically reverts
to the old setting.