Miele DA 6690 W Puristic Edition 6000 AM Operating instructions - Page 28

Cleaning and care Cleaning the grease filters in the dishwasher  Place the filters as upright as possible in the lower basket. Ensure that the spray arm is not obstructed.  Use a common dishwashing detergent.  Select a program with a wash temperature between 120°F (50°C) and 150°F (65°C). In a Miele dishwasher use the "Normal" program. Depending on the detergent used, cleaning the filters in a dishwasher may cause the inside filter surfaces to become discolored. However, this will not affect the functioning of the filters in any way.  If the filters have been installed incorrectly, you can insert a small screwdriver into the slit to disengage the locking clip. Resetting the filter saturation indicator for the grease filter Once cleaning is complete, the filter saturation indicator must be reset.  While the fan is turned on, press the grease filter button  for approx. 3 seconds, until only the 1 is flashing. The grease filter symbol  goes out. When cleaning the grease filters before the full operating time has elapsed:  Press the grease filter button  for approx. 6 seconds, until only the 1 is flashing. After cleaning  After cleaning, leave the filters on an absorbent surface to dry.  When removing the filters for cleaning, also clean off any accessible oil or fat buildup from the housing. Doing so will prevent a fire hazard.  Reinstall the grease filters. When inserting the filters, make sure that the locking clip is facing down. 28