Miele DA398-6 Product Manual - Page 25

Installation a 3 protective installation sheets for use when installing the chimney b 1 exhaust connector for an exhaust duct  6" (150 mm). c 1 reducer for an exhaust duct  5" (125 mm). d 1 non-return flap for installation in the outlet duct collar of the motor unit (not for recirculation mode). Depending on the device version, the non-return flap is already mounted. e Wall bracket for securing the hood on the wall. f Recirculation kit for recirculation mode contains diverter, aluminum hose and hose clamps (not contained in scope of delivery, available as optional accessory - see "Technical Data"). 8 screws, 3/16" x 2 3/8" (5 x 60 mm) 8 plugs, 5/16" x 2" (8 x 50 mm) for attaching to the wall (not for use in USA / CDN). The screws and plugs are designed for use in solid walls only. Use different fasteners for other wall construction types. Make sure that the wall can support the load. 2 x M 6 locknuts for securing the canopy. 2 screws 1/8" x 5/16" (3.9 x 7.5 mm) for attaching the chimney. 1 lever for disassembling the chimney. MontagIenstallaMtioonntajMeontagMgoionterMinogntagAesmennus Installation sheet 25