Miele DGC 6600 Operating instructions/Installation instructions - Page 150
Frequently asked questions, Deactivate Demo mode see Settings - Show
View all Miele DGC 6600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 150 highlights
Frequently asked questions The following faults can be corrected without contacting the Miele Service Department. If in doubt, please contact Miele. Risk of injury! Improperly performed installation, maintenance or repair work can pose a serious danger to users of the appliance. Installation, maintenance and repairs may only be carried out by Miele authorized technicians. Do not attempt to open the housing. Problem Possible cause and solution You cannot turn the ap- The circuit breaker has tripped. pliance on. Reset the circuit breaker (see data plate for the correct fuse rating). There may be a technical fault. Disconnect the appliance from the power supply for approx. 1 minute: - tripping the relevant circuit breaker or screwing the fuse out completely, or - tripping the ground fault circuit interrupter (GFCI). If the steam oven still will not turn on, contact a qualified electrician or Miele Service. The oven does not heat up. Demo mode is activated. The steam oven can be operated, but the oven heating does not work. Deactivate Demo mode (see "Settings - Showroom Program"). The oven interior has been heated by a heating drawer operating beneath it. Open the door and let the oven cool down. The fan can still be heard after the appliance has been turned off. The fan is still running. The appliance is fitted with a fan which removes steam from the oven. The fan will continue to run for a while after the appliance has been switched off. It will turn itself off automatically after a while. 150