Miele DGC 6600 Operating instructions/Installation instructions - Page 170
Electrical connection, Installer:, Connection, Power Supply, Replacing the power cord
View all Miele DGC 6600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 170 highlights
Electrical connection ATTENTION: Before installation or servicing, disconnect the power supply by either removing the fuse, manually "tripping" the circuit breaker or unplugging the appliance. Pull the plug not the cord. Installation work and repairs should only be performed by a qualified technician in accordance with all applicable codes and standards. Repairs and service by unqualified persons could be dangerous and the manufacturer will not be held responsible. Installation, repair, and maintenance work should only be performed by a Miele-authorized service technician. Work by unqualified persons can cause considerable danger to users. Miele cannot be held liable for any damage arising as a result of such work. Before connecting the appliance to the power supply, make sure that the voltage and frequency listed on the rating label correspond with the household electrical supply. This data must correspond to prevent appliance damage. Consult an electrician if in doubt. Connection Ensure that the connection data on the data plate (voltage, frequency, and fuse rating) match those of your electrical supply. Power Supply This appliance is equipped with a 5 ft (1.5 m) long power cord with a NEMA 6-20P three-prong grounding plug ready for connection. 240 V / 20 A / 60 Hz Make sure that the connecting socket is accessible after the installation of the steam oven. Replacing the power cord Danger of electrical shock! The power cord must only be replaced by a suitably qualified and competent person in accordance with current local and national safety regulations in order to avoid a hazard. If the power cord needs to be replaced, it must be replaced with a special connection cable, type H 05 VV-F (PVC insulated), available from Miele. For safety reasons, the steam oven may only be used when it has been fully installed. Installer: Please leave these instructions with the customer. 170