Miele ESW 4824 Operating and Installation manual - Page 10

Before the first use When first connecting the appliance to the power supply and after a power failure, the fan will run and a display test will be carried out for approx. 10 seconds. The appliance cannot be used during this time. Clean the appliance ^ Remove any protective wrapping. ^ Remove the non-slip mat and clean with a solution of warm water and liquid dish soap. Dry with a soft cloth. ^ Clean the warming drawer, inside and out, with a damp cloth and wipe dry. ^ Replace the non/slip mat once has completely dried. Heat the appliance Heat the warming drawer for a minimum of 2 hours. ^ Turn on with the "On/Off" touch control ^ Tap the "Menu" touch control until the 2 symbol lights. ^ Tap the "Temp." touch control until the 5th indicator lights. ^ Tap the "Timer" touch control until 2h lights up. ^ Close the drawer. The warming drawer is fitted with a self-closing device. The drawer is also fitted with a contact switch which will only allow the heating and fan to work if the drawer is closed. ^ Vent the room when heating the drawer for the first time. Metal components have a protective coating which may give off a slight odor the first time your new appliance is heated. The smell will dissipate after a short time and does not indicate a faulty connection. ^ The warming drawer will turn off automatically after 2 hours. 10