Miele ESW 4824 Operating and Installation manual - Page 24

IMPORTANT SAFETY INSTRUCTIONS ~ Before installation make sure that the voltage and frequency listed on the data plate correspond with the household electrical supply. This data must correspond in order to avoid risk of damage to the appliance. If in doubt, consult a qualified technician. ~ The electrical outlet should be easily accessible after installing the unit. ~ Be sure that after installation the power cord does not come into contact with any hot surfaces. ~ The food warming drawer must be installed so the contents of the drawer can be seen. Otherwise spills could cause burns or scalding. Be sure there is enough space for the drawer to be pulled out completely. ~ This appliance must not be used in a non-stationary location (e.g. on a ship). ESW 408x-14 ~ Only install the warming drawer in combination with built-in appliances recommended by the manufacturer. When installed with other appliances, the warranty is void since the manufacturer cannot guarantee the safe use of the plate warmer. ~ To install the warming drawer in combination with another appliance, a built-in shelf must exist in the cabinet to support the weight of both appliances. ~ When installed in combination with another appliance, the warming drawer must always be installed beneath the other appliance. The combination appliance can be set without a base directly onto the plate warmer. A shelf between the appliances is not necessary. ~ The building in dimensions of the warming drawer must be added to the building in dimensions of the combination appliance to determine the niche size required. Note to the installer: Please leave these instructions with the consumer of the appliance for the local building inspectors use. SAVE THESE INSTRUCTIONS 24