Miele EVS 6114 Operating and Installation instructions - Page 46

*INSTALLATION* Electrical connection  ATTENTION: Before installation or servicing, disconnect the power supply by either removing the fuse, manually "tripping" the circuit breaker or unplugging the appliance. Pull the plug not the cord. Repairs and service by unqualified persons could be dangerous and the manufacturer will not be held responsible. Installation work and repairs should only be performed by a qualified technician in accordance with all applicable codes and standards. Installation, repair, and maintenance work should only be performed by a Miele-authorized service technician. The voltage and frequency listed on the rating label must correspond with the household electrical supply to prevent appliance damage. Check these data before connection. Consult an electrician if in doubt. Installer:  Please leave these instructions with the customer. Connection  Make sure that the connection data on the data plate (voltage, frequency, and fuse rating) matches that of your electrical supply. Connection data The drawer is ready for connection and equipped with a 7' 2" (2,200 mm) power cord with a plug. 120 V / 15 A / 60 Hz Make sure that the connecting socket is accessible after the installation of the drawer. When another appliance is installed in combination with the drawer to the same circuit, operating both appliances at the same time may cause an overload. If in doubt consult a qualified electrician. 46