Miele H 6281 BP Operating and Installation instructions - Page 70
Deactivate Demo mode see Settings, Contact Miele Technical Service.
View all Miele H 6281 BP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
Frequently asked questions Problem Possible cause and solution The oven does not heat up. Demo mode has been activated appears in the display. The oven can be operated but does not heat up. Deactivate Demo mode (see "Settings An oven mode has been There has been a power failure which has caused the selected but the oven is current cooking process to stop. not working. Turn the mode selector to the • position and turn the oven off. Start the cooking process again. will appear in the display with flashing under : The power supply was interrupted for longer than 200 hours. Reset the time of day (see "Before using for the first time"). appears unexpectedly in this display and the symbol flashes at the same time. The buzzer may also be sounding. The oven has been operating for an unusually long period of time, this has activated the "Safety cut-out feature". Turn the mode selector to •. The oven is now ready to use again immediately. appears in the display. The Self Clean program door lock is not locking. Turn the mode selector to the Self Clean program • again. If the problem persists, contact Miele Technical Service. appears in the display. The door lock for the Self Clean program will not deactivate. Turn the mode selector to the • position and turn the oven off. If the problem persists, contact Miele Technical Service. appears in the display. A fault has occurred that you cannot resolve. Contact Miele Technical Service. A noise is heard after the cooking process is complete. After the cooking process the cooling fan will continue to run for a while after a program is complete to prevent moisture from building up in the oven, on the control panel or surrounding cabinetry. The cooling fan will turn off automatically. 70