Miele H 6560 B Product Manual - Page 91

The FlexiClip telescopic, Settings - Lighting.

Get Miele H 6560 B PDF manuals and user guides View all Miele H 6560 B manuals
Add to My Manuals
Save this manual to your list of manuals

Page 91 highlights

Frequently asked questions Problem Spots appear on the catalytic surfaces. Possible cause and solution The catalytic cleaning process does not remove spices, sugar or similar deposits.  Remove the catalytic panels and clean this type of soiling with warm water and liquid dish soap applied with a soft brush (see "Cleaning and care Cleaning the catalytic enameled back panel"). Baked goods are not cooked properly after following the times given in the chart. A different temperature than that given in the recipe was used.  Select the temperature required for the recipe. The ingredient quantities are different from those given in the recipe.  Double check the recipe. The addition of more liquid or more eggs will make a wetter mixture which will take longer to cook. The browning is uneven. The wrong temperature or shelf level was selected.  There will always be a slight unevenness. If the unevenness is great, check whether the correct temperature and shelf level were selected. The material or color of the bakeware is not suitable for the oven mode selected.  When using Surround  use matte, dark colored pans. Light colored, shiny pans will not produce as desirable results. The FlexiClip telescopic The bearings in the FlexiClip telescopic runners are runners do not push in not sufficiently lubricated. or pull out smoothly.  Lubricate the bearings with the special Miele lubricant. Only use this special lubricant as it is designed to withstand high temperatures in the oven. Other lubricants can harden and stick to the telescopic runners when they are heated.The Miele lubricant is available to order from Miele. The oven lighting turns off after a short time. The oven is factory set to turn off automatically after 15 seconds. This setting can be changed (see "Settings - Lighting"). 91

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
Frequently asked questions
91
Problem
Possible cause and solution
Spots appear on the
catalytic surfaces.
The catalytic cleaning process does not remove
spices, sugar or similar deposits.
Remove the catalytic panels and clean this type of
soiling with warm water and liquid dish soap
applied with a soft brush (see "Cleaning and care -
Cleaning the catalytic enameled back panel").
Baked goods are not
cooked properly after
following the times
given in the chart.
A different temperature than that given in the recipe
was used.
Select the temperature required for the recipe.
The ingredient quantities are different from those
given in the recipe.
Double check the recipe. The addition of more
liquid or more eggs will make a wetter mixture
which will take longer to cook.
The browning is
uneven.
The wrong temperature or shelf level was selected.
There will always be a slight unevenness. If the
unevenness is great, check whether the correct
temperature and shelf level were selected.
The material or color of the bakeware is not suitable
for the oven mode selected.
When using Surround
use matte, dark colored
pans. Light colored, shiny pans will not produce
as desirable results.
The FlexiClip telescopic
runners do not push in
or pull out smoothly.
The bearings in the FlexiClip telescopic runners are
not sufficiently lubricated.
Lubricate the bearings with the special Miele
lubricant.
Only use this special lubricant as it is designed to
withstand high temperatures in the oven. Other
lubricants can harden and stick to the telescopic
runners when they are heated.The Miele lubricant
is available to order from Miele.
The oven lighting turns
off after a short time.
The oven is factory set to turn off automatically after
15 seconds. This setting can be changed (see
"Settings - Lighting").