Miele H 7270 BM Operating and Installation instructions - Page 100
Electrical connection, 2NAC 240 V, 30 A, 60 Hz
View all Miele H 7270 BM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
*INSTALLATION* Installation Electrical connection Risk of injury due to electric shock. During installation, maintenance, and repair work, the oven must be completely disconnected from the power supply: Disconnect the oven from the power supply by tripping the breakers, or unplugging the power cord from the outlet. To do this, pull the plug not the cord. Risk of injury. Installation, repairs, and other work by unqualified persons could be dangerous. Miele cannot be held liable for unauthorized work. Installation, maintenance, and repairs must only be carried out by a Miele authorized technician. The connection data (voltage and frequency) on the data plate of the oven must match the power supply in order to avoid the risk of damage to the oven. Compare this before connecting the appliance to the power supply. If in any doubt, consult a qualified electrician. For safety reasons, the oven may only be used when it has been fully installed. The power cord plug must be inserted into a suitable outlet that has been installed and grounded in compliance with all applicable local codes. WARNING: THIS APPLIANCE MUST BE GROUNDED Installer: Please pass these instructions on to the customer. Electrical connection The oven is equipped with a power cord approx. 6 ft (1.8 m) long with a 4-pin NEMA 14-30P plug for connection to a power supply with: - 2NAC 208 V, 30 A, 60 Hz or - 2NAC 240 V, 30 A, 60 Hz Temporary or permanent operation on an autonomous power supply system or a power supply system that is not synchronized with the grid power supply (e.g., island networks, back-up systems) is possible. A prerequisite for operation is that the power supply system complies with the specifications of EN 50160 or an equivalent standard. The function and operation of the protective measures provided in the domestic electrical installation and in this Miele product must also be maintained in isolated operation or in operation that is not synchronized with the grid power supply, or these measures must be replaced by equivalent measures in the installation. As described, for example, in the current version of VDE-AR-E 2510-2. You can set the voltage variant (see "Settings - Electrical version"). KEEP THE OPERATING AND INSTALLATION INSTRUCTIONS IN A SAFE PLACE. 100