Miele KM 3465 G Operating and Installation manual - Page 27
Installation 27, See Important Safety instructions.
View all Miele KM 3465 G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
^ Prepare the work top cut-out as shown in the diagram. Rember to maintain the minimum safety distances to combustible surfaces: - 2 3/4" (70 mm) between the cut-out and the back wall and - 12" (305 mm) between the cut-out and a side wall or tall unit to the right or left of the cut-out. (See "Important Safety instructions"). ^ Seal the cut surfaces with a suitable heat-resistant sealant to avoid swelling caused by moisture. If during installation, the corners of the frame are not flush with the work top surface, the corner radius (max. 3/16" [4 mm]) can be carefully filed to fit. Installation 27
^
Prepare the work top cut-out as
shown in the diagram.
Rember to maintain the minimum
safety distances to combustible
surfaces:
-2
3
/
4
" (70 mm) between the cut-out
and the back wall and
- 12" (305 mm) between the cut-out
and a side wall or tall unit to the right
or left of the cut-out.
(See "Important Safety instructions").
^
Seal the cut surfaces with a suitable
heat-resistant sealant to avoid
swelling caused by moisture.
If during installation, the corners of
the frame are not flush with the work
top surface, the corner radius (max.
3
/
16
" [4 mm]) can be carefully filed to
fit.
Installation
27